Compuprint 10200 Programmer Manual Uživatelský manuál stáhnout pdf (Strana 48)

Commands

ESC M

Selects 10.5 point. 12 CPI. (EPSON)

ASCII Code ESC M

Hexadecimal Value 1B 4D

Decimal Value 27 77

This is a terminator code. It causes all data present in the print buffer to be printed. Subsequent

data will be printed at 12 cpi if you previously set the compressed spacing by sending the SI or

ESC SI command. If you select the proportional printing, this command is stored.

ESC m

Selects magenta ribbon band. (IBM)

ASCII Code ESC m

Hexadecimal Value 1B 6D

Decimal Value 27 109

This command selects the magenta ribbon band.

ESC P

Selects 10.5 point, 10 cpi. (EPSON)

ASCII Code ESC P

Hexadecimal Value 1B 50

Decimal Value 27 80

This command selects 10.5-point, 10-cpi character printing. If you change the pitch during

proportional mode (selected with the ESC p command) the change takes effect when the printer

exits proportional mode.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 233 234

Žádné komentáře

Compuprint 10200 Programmer Manual Uživatelský manuál Strana 48