Compuprint MDP40B Programmer Manual Uživatelský manuál Strana 134

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 289
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 133
B-27
If the debug flag (0x40) has been set, the described string is sent together with the
vector of the values read by the reading sensor with the following format:
CR LF
nn CR LF where nn is the number of readings performed by the sensor, in ASCII
CR LF format
1
st
scanning
11 CR LF where 11 is the first read value, in ASCII format
22 CR LF where 22 is the second read value, in ASCII format
NN CR LF where NN is the Nth read value, in ASCII format
CR LF
2
nd
scanning (if
rn
1 )
11 CR LF where 11 is the first read value, in ASCII format
22 CR LF where 22 is the second read value, in ASCII format
………………………….
NN CR LF where NN is the Nth read value, in ASCII format
CR LF
Other scanning procedures (if necessary;
rn
> 1 )
………………………….
FF
Zobrazit stránku 133
1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 288 289

Komentáře k této Příručce

Žádné komentáře