Compuprint MDP40B Programmer Manual Uživatelský manuál stáhnout pdf (Strana 213)

C-71

(*) One pass = 8/72” at 9/18 pin

8/60” at 24 pin

The z parameter defines the horizontal zoom coefficient in decimals.

The following values are allowed for it:

z Values

00-09 Ignored values

10-34 Acceptable values

The n parameter, comprising one byte, enables or disables plain language printing of

the Bar Code ("Human Readable Line" - H.R.L.) in the lower part:

n Human Readable Line

0 Disabled

1 Enabled

“Human readable” characters are printed with the fonts listed below, where no zoom

factor is applied. The fonts used for the Human Readable Line depend on the type of

Bar Code selected:

H.R.L. Font Bar Code Type

OCR-A Code39, Codabar, 2/5 Interleaved and 2/5 Industrial

OCR-B UPC-A, UPC-E, EAN-8 and EAN-13

If the numeric parameters are omitted, the current value is retained.

The command is not accepted (command specification error) if it is sent with the

following parameter values:

m between 09 and 99

z between 35 and 99

n between 2 and 9

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 288 289

Žádné komentáře

Compuprint MDP40B Programmer Manual Uživatelský manuál Strana 213